Clamps & Pliers

The thickness of the Aluminum base adds 5/8" to the maximum capacity of the Toggle Clamp. T50505GH-01 T50505GH Part No. Description Weight (lb) T50505GH-01 Pre-tapped Alum. Base ONLY. 0.3 T50505GH Includes: pre-tapped...

Chain Pliers P/N: PFC1024 PRODUCT DESCRIPTION: Clamp odd shaped multiple items. Adjust tension with crank handle.   Part No. Chain Length (in) Holds Pipes (in) Weight (lb) PFC1024 24 up to ∅6.5 1.9

Optional clip-on top V-pad for clamping round parts or 2 parts at once. V-Pad clips onto the swivel pad of Inserta Clamps and Sliding Channel Clamps. Part No. Material For Utility Clamps For Inserta Clamps For T-Post Clamps For Sliding Channel...

Connectors P/N: T54606 PRODUCT DESCRIPTION: Use the connector to attach Strong Hand Tools® pliers and clamps to the table and other BuildPro® accessories so clamps will stay in place. Part No. Thread Dia. (in) Weight...

Inserta Clamps - T Handle P/N: UDN5150 / UEN5200 PRODUCT DESCRIPTION: Place the Inserta Clamps into the ∅5/8" holes on the BuildPro® Tabletop, Riser Blocks, or Economy Stops and Clamping Squares for fast, easy clamping. Clamp in the vertical...

Inserta Pliers PRODUCT DESCRIPTION: Insert into ∅5/8 for fast hold-down clamping. Mount on the Right Angle Bracket, Riser Block, or Clamping Squares for push down clamping at an elevated height for taller workpieces. The patented rear crank handle...

Magnetic Top V-pad Add the optional Top V-pad to the Inserta Pliers swivel pad to hold round, square, flat, and angled stock. View Demo Video of Inserta Pliers with Magnetic V-Pad Part No. Material For Inserta Pliers For Inserta Clamps For...

MagSpring Clamps PRODUCT DESCRIPTION: The spring-loaded, one-handed clamp with quick-set, magnetic V-Pad. Quick and easy to use! Squeeze to open, set in position and turn to tighten.   Part No. Clamping Capacity (in) Throat Depth...

MOUNTING ADAPTOR The Mounting Adaptor swivels 360° and provides a 1" extension of the Inserta Pliers base for the extended reach, or retraction, of the Inserta Pliers as needed for precise placement of the clamping pad. *PATENT PENDING Part No...

Round Stock Pliers P/N: PG637V PRODUCT DESCRIPTION: These Pliers feature a rotating V-Pad on the top jaw, and an adjustable swivel head spindle on the bottom jaw for the secure clamping of round pipes, up to 2-1/2" in diameter, against a flat surface...

View Demo Video Side Clamp P/N: TCX5210 PRODUCT DESCRIPTION: Insert into the Buildpro® table holes for low profile, light duty, horizontal clamping, locating, and stopping. A turn of the aluminum knob advances the spindle, bringing the swivel...

Slide the Sidekick onto the clamp rail of Inserta Clamps for horizontal clamping force. Part No. For Utility Clamps For Inserta Clamps For Sliding Channel Clamps Stroke (in) Weight (lb) XDS UD Series UDN5150 -- 1 0.6 XFS UF...

Sliding Channel Clamps PRODUCT DESCRIPTION: Precision machined, steel base of the 360° Slot Clamp slides into the 1.7" spacing which enables the clamp body to slide along the entire surface and swivel 360° for positioning at any point. * Not...

T51650Straight Handle T51655T-Handle ATNC50T-Handle w/ Magnetic V-Pad(Replacement for Notcher Kit) T-Post Clamp PRODUCT DESCRIPTION: Place the Adjustable T-Post Clamp in any of the ∅5/8 holes on the BuildPro Tabletop, or Heavy...

Use with Table Mount Base Kit on BuildPro Tables. Part No. Description Weight (lb) PXC90 Table Mount Base Kit(2 pc.) 1.1  

Mount any of the seven Good Hand® Toggle Clamps on this low-profile, pre-tapped Adjustable Mounting Base. Mount Toggle Clamps directly on the BuildPro Tabletop, Riser Blocks or Econo Stop & Clamping Squares,...